Application Instructions and Notes

APPLICATION PROCEDURE FOR APPLYING GLARE^® PRODUCTS AND GLARE^® KITS

GLARE^®Products are easy to apply and can be used without having to wait between different product applications. For example, GLARE^®SPIDER can be immediately used after using GLARE^®KNOCK OUT^®. No waiting time!

First prepare your vehicle before applying GLARE^®PRODUCTS. Wash the vehicle with Dawn^_®Liquid Detergent and dry with either a micro-fiber towel or chamois. Dawn_^®Liquid Detergent cleans the vehicle's surface of all dirt, grease, etc. THIS IS A VERY IMPORTANT STEP BEFORE APPLYING GLARE^®PRODUCTS!

If you are applying GLARE^®Products BY HAND, the order of application in either sun or shade is:

          STEP 1 - KNOCK OUT^®
          STEP 2 - SPIDER
          STEP 3 - MICRO-FINISH^™
          STEP 4 - GLARE^®+PROFESSIONAL POLISH
          STEP 5 - GLARE^®+PROFESSIONAL POLISH
                          WAIT FOR POLISH TO HAZE
                          (30 MINUTES OR SO)
                          THEN REMOVE POLISH
        STEP 6 - WAIT 24 HOURS BEFORE
                          GETTING WET

If you are applying GLARE^®Products BY MACHINE BUFFER, the order of application in either sun or shade is:

          STEP 1 - KNOCK OUT^®
          STEP 2 - MICRO-FINISH^™
          STEP 3 - SPIDER
          STEP 4 - GLARE^®+PROFESSIONAL POLISH
          STEP 5 - GLARE^®+PROFESSIONAL POLISH
                          ****APPLY BY HAND****
                         WAIT FOR POLISH TO HAZE
                         (30 MINUTES OR SO)
                         THEN REMOVE POLISH
        STEP 6 - WAIT 24 HOURS BEFORE
                         GETTING WET

Apply each of the products exactly the same way in the order as listed above. Avoid rubber, powder coated materials, textured plastic, and flat paints. Buff in the product until the product disappears with a clean micro fiber towel or a buffing pad (depending on which method you're using). If you are applying product by hand, always use a back and forth linear motion (never us a circular motion). Do not use too much product as GLARE^®PRODUCTS are extremely concentrated. A little bit of GLARE^®goes a long way. Wipe off the excess using a clean micro fiber towel. Use a clean micro fiber towel for each of the products mentioned above. After you have finished using the four products (coats) as described and listed above, you will then apply a fifth coat of GLARE^®+PROFESSIONAL POLISH by hand. Rub GLARE^®+PROFESSIONAL POLISH in partially, but not until the polish disappears. Let the polish dry to a haze! Apply polish to the whole vehicle without buffing the haze off. Don't forget to include windows, polycarbonate (plexiglass), smooth plastic, mirrors, chrome, metal alloys, carbon fiber, fiberglass, gel-coat, etc. When you are finished with the vehicle, wait 30 minutes or longer (depending on humidy conditions), and then use a clean micro fiber towel to buff to a brilliant shine! Do not get water on the vehicle for 24 hours while the polish chemically cures and hardens.

Also, do not put any other products on a GLARE^® finish except GLARE^®products because Glassplexin^®does not mix with silicons, waxes, or polymers. This is a very important point. As you drive, dirt from the road can cause new scratches. If you want to fill in new scratches, you can do this without any problem by applying another coat of GLARE^®+PROFESSIONAL POLISH. No need to worry about wax buildup with GLARE^®because there is no wax in GLARE^®. You don't have to repeat the four listed steps above unless your car is key, vandalized etc.

GLARE^®PRODUCTS are perfect for all types of paints and any material you want to shine and protect. One of the features of GLARE^®+PROFESSIONAL POLISH is you can apply it to exhaust pipes without it burning off like other products. This is especially perfect for those who have motorcycles with multiple exhaust pipes. The difference is remarkable!

BUFFING PADS

If you are using buffing equipment, the following color pads are used for these GLARE^®PRODUCTS:

KNOCK OUT^®= YELLOW
MICRO-FINISH^™ =ORANGE
SPIDER = ORANGE OR GREEN
GLARE^®+PROFESSIONAL POLISH = WHITE OR BLACK OR BLUE

Each GLARE^®pad has a stiffness scale printed on the pad. The scale displays the hardness or the softness of the pad. More heavily scratched surfaces will require a more agressive pad, yellow for example. Lightly scratched surfaces will only require a least aggresive pad, orange or white. The best way to determine the condition of your finish is to place your vehicle in strong sunlight or under a bright LED or fluorescent fixture. This will determine which pad or step to start with when applying GLARE^®PRODUCTS. However, no matter the condition of the finish, it is recommended that you complete all 6 steps to create the ultimate shine!

Look at this video of polishing a McLaren. Nice!
McLaren Video